ILC noise for large apertures at CDT noise levels
Mar 16 2018, Raphael Flauger (posted by Clem Pryke)
This is from en email from Raphael to Clem and Tom dated 7 March 2018 with subject "Delensing survey".
"To check things, I've run component separation on the 04 data challenge high resolution simulations to generate a noise curve for an ILC high resolution map. (The philosophy here is that I would clean the high resolution maps and derive a kappa map from the resulting cleaned map.) I'm attaching the noise curve here with white noise of 1uK arcmin shown for comparison. So over the relevant range it's roughly 1uKarcmin as expected (as one could also see without much effort from the noise models). I then ran iterative delensing for this noise curve (at the power spectrum level). I find a residual AL=0.123. It's 20% higher that what we used (and I can check what that does to r), but in any case, it's reasonably close."