Fisher forecasts for inverse noise variance weighting
This posting shows plots from my Fisher code as well as Ben's
These are all for inverse noise variance weighting as is also done in the map-based simulations. This is important to keep in mind to avoid confusion. That said, the legend is
Orange: Pole deep (c mask) (AL=0.076) Red: Pole wide (Reijo) (AL=0.123) Blue: Chile hybrid, pole delensing for the deepest field in Reijo’s Chile deep v1 (AL=0.081), wide area LAT delensing on the rest (AL=0.27) Black: Chile shallow (shallow part of Reijo Chile deep v1 only) wide area LAT delensing (AL=0.27) Purple: Reijo’s Chile deep v1, wide area LAT delensing (AL=0.27) Green: Deepest region in Reijo’s Chile deep v1 (AL=0.081)
Inverse varianc weighting is suboptimal and isn’t what one would do in practice. This explains the seemingly odd behavior at large r for Chile deep v1 vs Chile shallow (which is a subset). Somewhere between r=0.003 and r=0.01 the shallow survey reaches S/N>1 per mode. With inverse noise variance weighting, the analysis of the full survey downweights these modes and most strongly weights the modes in the deep field, missing much of the information. In practice this just means an inverse noise variance weighted analysis for Chile deep v1 for r>0.005 or so is (rather) suboptimal. So this plot should not be used to draw conclusions about site distributions.
Another related caveat holds for the pole. The SAT sensitivities have been increased substantially (this is all for the 2-6-6-4 configuration), but the delensing levels have remained the same. This means S/N per mode for the pole is significantly above 1, which is also suboptimal. So for the SAT map depth achieved by pole, one should delens more.